Smart Interface Cable
The Smart Interface Cable is a communication device between the Divers installed with the communication cable (DXT or DDC) and a computer, laptop or tablet. Simply connect the Smart Interface Cable to an available USB port on the computer and connect the other end to the communication cable. Diver can now be accessed using the free Diver Office software. Once connected, the Diver can be programmed and data can be read and downloaded.
The Smart Interface Cable has a barometric sensor that allows real-time comparison of Diver readings and manual measurements.
Simply connect the Smart Interface Cable without removing the Diver from its original position in the well.
The Smart Interface Cable has indicators to detect if the communication cable is connected and if the Diver is connected correctly, and to indicate if one of the two is not malfunctioning.
The Smart Interface Cable can be used in communication cables from 1 to 500 meters in length.
The Smart Interface Cable is designed to be used in the field and supports all Divers.
Note: For Diver to communicate through the Smart Interface Cable, Diver Office 2017.2 or later software must be installed.
Call + 55 (48) 3365-4374 and learn more!
Necessita de mais
Gostaria de mais informações? Ficaremos gratos em enviar nosso Portfólio de Produtos ou Serviços. Por favor, complete nosso formulário de Solicitação de Informações para que possamos fornecer a informação mais relevante com base nas suas necessidades.